Как установить стопорную шайбу?

Установка стиральной машины, поместите предварительно собранный воздух между гайкой и/болтом и соединительным материалом. При затягивании гайки или болта, one half of the Washer pair will be seated to the joint material and the other half will be seated to the nut or bolt. Tighten joints with the Washers using standard tools. Retightening is not needed. The use of ubricants is highly recommended when installing the Washers. A high quality lubricant designed to prevent seizing will reduce friction during installation and improve the consistency of clamp load in joints.

When installing the Washers in a common application, expect an increase in required torque over recommended installation torque to achieve proper clamp load and maximum joint safety.

Удаление и повторное использование

Removing the Washers requires no special tools or procedure. Simply loosen the joint in the normal method and check the Washer to ensure cam faces disengage. Хотя шайбы обычно многоразовые., it should always be inspected for deformation or excessive wear before reuse. Если шайбы деформированы или сильно изношены,

discard and use a new pair.